Kia- Sorento-2016 Pinout Info

[Hercules 2]

Hi, guys.

Good day, Could you help me please, I try to clean a crash  KIA_SORENTO_2016_95910-C6000_XC2361A-72F, but I received a error message, I add the LOG below, between the CAN I added a resistor 120 ohm.

15.03.2021, 22.10.57]      Selected tool: KIA - HYUNDAI INFINEON XC23xx CAN BUS
[15.03.2021, 22.11.00]      
[15.03.2021, 22.11.00]      **************************************
[15.03.2021, 22.11.00]      *    Programm version: 4.0.1.67   *
[15.03.2021, 22.11.00]      **************************************
[15.03.2021, 22.11.00]      
[15.03.2021, 22.11.00]      Check key...
[15.03.2021, 22.11.01]      Connect key:888  ID Key: 8888
[15.03.2021, 22.11.01]      
[15.03.2021, 22.12.10]      
[15.03.2021, 22.12.10]      **************************************
[15.03.2021, 22.12.10]      *    Programm version: 4.0.1.67   *
[15.03.2021, 22.12.10]      **************************************
[15.03.2021, 22.12.10]      
[15.03.2021, 22.12.10]      Check key...
[15.03.2021, 22.12.10]      Connect key:******  ID Key: ******
[15.03.2021, 22.12.10]      
[15.03.2021, 22.12.10]      Check OBD adapter, please wait...
[15.03.2021, 22.12.11]      Check on 2000000 Kb...
[15.03.2021, 22.12.12]      Check on 2000000 Kb... OK!
[15.03.2021, 22.12.12]      Adapter version STN2120v4.1.1
[15.03.2021, 22.12.12]      Serial number 212********
[15.03.2021, 22.12.12]      Check OBD adapter, OK!
[15.03.2021, 22.12.12]      Set speed 2 Mb/s.
[15.03.2021, 22.12.12]      -----------------------------------------------------------
[15.03.2021, 22.12.12]      Trying to connect to the device...
[15.03.2021, 22.12.12]      No answer from unit!

 

Thank you for your time!

 

 

 

[Andrey 33]

incorrect connection. look PINOUT-Info.

 

[Hercules 2]

Hi, Thank you for your time, and I used the pinout into the GCT v4.0, and I see the image you attached to me, but none of them show the connector than I have.

[iskom67 16]

Some kia-hyundai modules have different GND connection.

Check this: