Pro-CS

It looks like the Programmer has a possible internal problem, I installed the driver (software) and everything looks good, but I can not read anything no Eeprom or ECU's, I did the "Pin Test Interface and it looks like something is wrong, I'm attaching some pictures, can you tell me what this mean. Thanks

• Пользователи, Here is a picture of the driver information

If I still have problems with this installation, can you maybe help me with the installation via AnyDesk app, That will be very helpful. please let me know.

Thanks

I just changed it, the one before was year 2020

Thanks, I saw these videos before, the problem I have is updating the driver, I tried the way they show in the video but is not working, I need the file to update the driver and maybe help to guide me how to download it, thanks

Hey guys I'm having an issue when I try to use GProg-Pro, I'm working in a Subaru Locked ECU and when I try to "SEC BOOT" I got a error message something about Software, some one told me I need to update the driver, but I don't know how to update it, anybody has this software update and mot important how to install it to my computer, I really need help, Thanks

Hey guys I'm trying to clear crash on a Subaru SRS module RH850 Locked R7F701686, and when i click on SET BOOT I got this message

"No response from the device! The message header was not received <soft>

does anybody knows what this means?

Thanks for you help

What about this RAM ProMaster Module part number 52090837 with ECU SPC560P50?, I didn't see how to clear crash in this module, any help.

Thanks

Last question, Tactrix is the brand?

because i see a few different ones on Amazon, and some of them says Tactrix Inc. on the picture but if you see the brand it says something different. Just checking

Thanks

This one ?

will this work?

Thanks for your help, I'm really lost with this programmer, it's more complicated than the one I normally use (CarProTool), but I need to learn how to use it, I know this tool is very good, but a little complicated to operate, until you have used for a few times. Any help is more than wellcome.

Thanks

Do I need to add it? or which one I need to select? If I need to add it, how do I do it.

thanks

Or maybe my J2534 is not on the list?

Sorry I'm still confuse I'm attaching a video if you can ley me know what I'm doing wrong, please

Thanks

Video GromCalc.MOV

On ProByte, do I need a 120 ohms resistor between the CANBUS contacts?

Also, do I need to connect it with the J2534 device or with the CAN cable?, if you have any picture that will help a lot, thanks

Thanks, I'm not very familiar with his programmer, so I'll try my best. where exactly do I find the clear file? I looked around and couldn't fin it.

Thanks

Hey mates, I'm new to this programmer, I'm trying to reset (clear crash) on this Module:

2019 Subaru crosstrek. -  98221FL190. -  R5F61726

I don't see a way to do it with this GromCalcTool (G-Prog Pro full). Or maybe just don't know how, or maybe is not possible to do.

If there is a way to do it, please can you explain step by step how... how to read, how to clear crash and how to write back.

Thanks a lot in advance for your help

Hey Guys, how do I install or download the software for the GCT full, I just got it ans I need start using it ASAP.

please show me how. Thanks

I'm buying from USA so I just want to buy everything I need in one time. Thanks

I just need to know if you have support in English, in case I have problems or questions.

I know about the SRS-full-pack, my question is if I need any other cable, or license to be able to use CAN or K-Line.

Thanks

This question is for the one's that have used the GromCalcTool for long time and know exactly what licenses are needed to do the work.

I have my shop and do a lot of airbag computer reset, right now I'm using CarProTool (CPT) but it's being doing wrong, so I need a second programmer but more reliable and looking at this it seems to be my best option, so my question is.

What do I need to purchase (tools and licenses) to be able to cover all Renesas (RH850, H8SX, etc) Infineon... ok all ECU's. And if possible with K-line, Clear options or on board pinouts.

Please advise if the full package is my best option or buy separate. 

If full package is the best option, Do I need any extra tool or license to cover every single ECU (Including looked and tricore), all car brands.

Thanks for your help