Hercules
Пользователи GCT-
Content count
31 -
Joined
-
Last visited
Posts posted by Hercules
-
-
-
Hi,
Infiniti Q50 98820-6HE0A bosch eeprom, read and clean perfect, write the memory but it does not delete the code.
Has anyone else had this problem?
-
Hi, I have a module Nissan Versa 2015 98820-3WC0A, Bosch eeprom, I used the v.5.0 GCT, read dump perfect, clean crash, write calculator perfect but when install the module in the car, the light in ON, but there is no code.
Could you help me?
-
Hi, Could you help me with this module, is a Infiniti Qx80 2016 98820-3ZE0A Bosh Eeprom,
I attach the crash file.
please help me with the .cal to clean the crash
-
Hello, When a module has that code, it is possible to repair the module, or definitely the module does not work?
Thanks for your time.
-
Hi, I have this module Nissan 370 2020, memory 95128, but I cannot clean the crash. Could you help me please
-
-
Hi Could you help me please
I tried to clean this module, I found into the programmer a same calc (98820-6HE0A), but when I put the module in the car, appears the same code B1421 FRONTAL COLLISION DETECTION, the crash does not erase the module, Could you help me please?
Thank you for your time.
-
Hi, Good evening.
I tried to connect a Airbag module of NISSAN_VERSA_2017_ 98820-9KS0A Bosch memory 95128, I used the new version 4.0 but I received the bellow error.
Please Could you help me, how can I connect by CAN BUS.
Thank you.
-
-
Hi, Good day!
I tried to connect a Airbag module of INFINITY_ QX50_ 98820-5VS0B , I used the new version 4.0 but I received the bellow error.
Please Could you help me, how can I connect it and fix it.
Thank you for your time
-
I guys, I need your help, I tried to read a NISSAN_KICKS_2018_98820-5RL0A_95128, I used GCT v4, but I received a error message, I attached the Log file, and the pinout.
Thank you for your time.
-
30 minutes ago, Interkeyservice said:Thank you my friend. for your help and your time.
-
3 hours ago, kilya31 said:Use calculator to clear the crash dump, the clear button does not work in the module
Sorry, but where can I find the calculator?
-
Hi guys, I hope you can help me, I have a module for a Nissan_Pathfinder_2018_98820-9PM0A_BOSCH 0 285 013 916-95128, I used GCT v4, the program read the memory eeprom, but when a I tried the clean the crash does nothing, I attach the Log and the picture, I don't know if I'll be doing something wrong,.
Thank you, for your time.
-
On 3/25/2021 at 1:21 AM, kilya31 said:Not all blocks are read by OBD, in order to add blocks, you need a block to check and add, different addresses for accessing blocks.
Ok, thank you for your time.
-
Hi, Thank you for your time, and I used the pinout into the GCT v4.0, and I see the image you attached to me, but none of them show the connector than I have.
-
Hi, Good evening.
I tried to connect a Airbag module of NISSAN NV200 98820-9SE0A Bosch 0 285 014 098 memory 95128, I used the new version 4.0 but I received the bellow error.
Please Could you help me, how can I connect by CAN BUS.
-
Hi, guys.
Good day, Could you help me please, I try to clean a crash KIA_SORENTO_2016_95910-C6000_XC2361A-72F, but I received a error message, I add the LOG below, between the CAN I added a resistor 120 ohm.
15.03.2021, 22.10.57] Selected tool: KIA - HYUNDAI INFINEON XC23xx CAN BUS
[15.03.2021, 22.11.00]
[15.03.2021, 22.11.00] **************************************
[15.03.2021, 22.11.00] * Programm version: 4.0.1.67 *
[15.03.2021, 22.11.00] **************************************
[15.03.2021, 22.11.00]
[15.03.2021, 22.11.00] Check key...
[15.03.2021, 22.11.01] Connect key:888 ID Key: 8888
[15.03.2021, 22.11.01]
[15.03.2021, 22.12.10]
[15.03.2021, 22.12.10] **************************************
[15.03.2021, 22.12.10] * Programm version: 4.0.1.67 *
[15.03.2021, 22.12.10] **************************************
[15.03.2021, 22.12.10]
[15.03.2021, 22.12.10] Check key...
[15.03.2021, 22.12.10] Connect key:****** ID Key: ******
[15.03.2021, 22.12.10]
[15.03.2021, 22.12.10] Check OBD adapter, please wait...
[15.03.2021, 22.12.11] Check on 2000000 Kb...
[15.03.2021, 22.12.12] Check on 2000000 Kb... OK!
[15.03.2021, 22.12.12] Adapter version STN2120v4.1.1
[15.03.2021, 22.12.12] Serial number 212********
[15.03.2021, 22.12.12] Check OBD adapter, OK!
[15.03.2021, 22.12.12] Set speed 2 Mb/s.
[15.03.2021, 22.12.12] -----------------------------------------------------------
[15.03.2021, 22.12.12] Trying to connect to the device...
[15.03.2021, 22.12.12] No answer from unit!Thank you for your time!
-
Hi Guys!
Could you help me please, Does anybody knows the diagram Pinout Info of a EEPROM memory 95910-C2000
Module:KIA/HYUNDAI EEPROM MOBIS CAN BUS
Thank you!
in GCT support (English) For English Speaking Users
Posted · Report post
Can this file be added to the calculator? It worked perfectly.
INFINITI_Q50_98820-6HE0A_EEPROM_CRASH.bin
98820-6HE0A OKAY.bin