llaverosv

how do you fixed it? thanks for your answer

thanks for your support. this is a H8SX R5F61725F, from Honda Pilot 77960-SZA-X120-M1.

I didn't try to read it via OBD2 , since in a topic found that cant read honda modules via OBD2.

Also didn't found this file in DATABASE FIRMWARE. 

attached coneections with i worked with.

Hi, have a question:

lately when try to read H8SX and RH850 family devices, the screen on my software is frozen.. something wrong , any bad conection ?

my version of soft 5.0.0.19  and device GCT00619

thanks in advance for any help

Hi mates, have erased crash=ht data from SRS module, toyota rush 89170-BZ351. Read it and crash data with gprog, there are not DTC'S on memory

but light indicator is ON... is there any special procedure after crash data erased?

attached dumps

thanks in advance for your help

New dump _( GCT00619_36E36615_ED )_original.bin

cleared.bin

hi, dealing with this Hyundai Santa fe 2020, 95910-s2000 , veoneer, TC23XX-32F. 

after clear crash data dtc B1620 is present. is there any way to repair this ecu with file?. wrote the original file and still get B1620. may lights on dash...........

thanks friends for any help 

New dump _( GCT00619_36E36615_ED )_CRASH.bin

Hi need to clear crash data please , file from nissan versa 2020 SRS MODULE, bosch 98820 9ER0B, 0 285 015 882.

Eeprom 95640. file and pics attached

98820 9ER0B 95640.BIN

thanks, readed via OBD2 with ver 3.0.0.33. and writed via UART. 

thanks for reply. just 3 wires  positive, can C and Can H, and have conected ground to chassis .

will look for ver 3.0.0 and try. thanks again

Hi friends. working on this toyota vigo 89170 0k410 , with RSF61725FPU. 

Working on bench , able to identy the module, and also read DTC's via OBD. but when try to read memory get message NO ANSWER FROM UNIT.

any idea what could be wrong ? thanks in advance

work DONE!!!

Hi, working on this SRS module  65.77-9890597-01, eeprom 25512. but cant clear dtc 930AB7 THREE CRASH MESSAGES STORED.

looking if anybody can take a look to this file . thanks in advance for any help

BMW X3 CRASH.BIN

thanks my friend, there was nothing missing. 

Hi looking if anybody have a picture of mazda cx5 2019 srs module, KB7W 57K30. near of the eeprom seems like's there is a missing component.

will try this way. thanks for your suppor

Hi, cleaned this module. but i'm getting DTC B1620 Internal Fault- replace the unit SRCM

have write the file via obd2 , and Also via UART. but no way to erase this fault.

anybody able to check this file for me please. thank in advance.  ( oriiginal file attached)

New dump _( GCT00619_36E36615_ED )_original.bin

Hi. my laptop was broken . Need to install grom calc , anybody able to install it please. i have try but not able to connect to modules reading via OBD2.

thanks in advance for any help

hi, yes. you need to read the file via OBD2. and then modifu via uart. 

Hi, looking for a file for a 89170-0K410 with renesas r5f61725 . Other guy try to erase crash data but lost the info. just FF, there is no comunication with module

thanks for any info

will take a look at the data base

is anybody need it , these is the file from other module. job done. thanks

TOYOTA___LEXUS_(DENSO___512...FUJITSU)_H8SX_R5F617xx_CAN_BUS_(READ_FLASH)_.bin

By mistake read the file in 256k, but didn't made a backup in 512.

when i try to write via uart send me message FLASH SIZE MCU AND FILE SIZE DIFFERENT.

So looking for a good file for a module 89170-35500, Thanks in advance for any help

JOB DONE!! thanks for your comments.  Got a file  from other module with same part number , wrote in my module and NO dtc's and indicator is OFF 

thanks for reply.

 the original file was lost. (my mistake, no backup) , on first time i wrote empty file via UART  but there was no communication with the module,

so i wrote a recupery dump from other number of module with result i got communication but didn't turn off the light on cluster and there are fault codes on it 

B1633, B1638, B1651, B1660, B1806, B1821.

So no original file ... thanks in advance for any help 

thanks for reply, module 89170-42850. mcu R5F61797. 

wrote original file and module is working again with crash data. So my question is wich file do i need to write in to the mcu.

sorry my friends my maternal tongue is spanish , but i try to do my best

thanks for reply. i just write the flash data. didn't press ERASE button. Do i need a recovery dump for this module ?

thanks again